JZC-6604 waste tire to crude oil machine

waste tire to crude oil machine 1.Raw material: waste tyre, plastic, rubber 2.oil yield 52% 3.With CE&ISO9001,ISO14001

JZC-6604 waste tire to crude oil machine

 

 

The machine can turn “waste” into wealth, it helps to solve the energy crisis.And it desposals the rubbish ,making our “home”more beautiful.

1.This equipment is composed by these parts:

1)Reactor

2)Desulfurization dedust

3)Water film cyclone

4)Bag dedusting

5)Draft fan

6)Gas seperactor

7)Depositing tank

8)Cooling pool

9)Oil tank

10)Waste gas recycle system

2.The principle of the equipment

Open the door of the cracking reactor then put scrap tires into the body of the cracking reactor.Then the body of the cracking reactor will be heated up by the fuel under it. The scrap tires will decomposed when it heated up to a certain temperature in the cracking reactor. The decomposed tires transformed into exhaust gas and crude oil in the cracking reactor. Exhaust gas will processed in the emissions scrubber transmitted by the pipe on the top of the cracking reactor, by the processing of emissions scrubber, the harmful gas will changed into clean air then release into the air .When crude oil get through the gas separate, the impurities will be filtrated, so that crude oil can be refined .Crude oil get through the depositing tank to the cooling pool for cooling in it then transform into liquid.Liquid crude oil will delivered to tanks for store, and the exhaust gas from the crude oil in the tank will transported to exhaust gas recycle system then transported to the bottom of the cracking reactor as fuel to heat up the cracking reactor .

 3.Charateristics of the equipment

1)Domestic pioneer of this technology

a. In its key installment decomposition processor design, has thoroughly overcome the disadvantages of the domestic present vertical flat base split processor, such as bottom partial being heated non-uniformity, easy to break, low output, short service-life is short and so on, the main engine uses horizontal-type 360ostructure-0.4 R/M

b. Fast practical feed-in and discharge system. The highest feed-in quantity every 24 hour achieved 5 tons, Discharge time for 300kg carbon black only needs 90 minutes. The highest feed-in amount of the integral unit equipment every 24 hours achieves 15 tons.

c. Highly effectively gas heating system. In the process of refining oil, after the gas is heated up to 150 , it will produce a large amount of unliquefied gas-CH4& C4H8 , which cant be formed at normal temperature, normal pressure. If those gases have been fully burning by the specific designed gas nozzle, they can produce a great amount of energy and economize resources.

d. Flue dust catcher system. It matches the bidirectional water impact type tornado dust removal room, and the rate of the flue dust catch is access than 95% .

2). Company Commitment

The company pledge that each kind of series equipment we sell have the consummation the post-sale service, a warranty period year, that thoroughly settle down customer extra worries.

3).Security

The main equipment is of high safety. The phase of the unliquefizable waste gas produced during the process is alkyl from C1to C4, which is dangerous when burning directly. In our process, it is transferred first through a water close device and a safety device- burning air muzzle. Before burning, we should ensure the safety of production.

4).Environmental Protective

Dispose waste gas, liquid, and residua in the process:

a. Waste gas: Transferred through two safety device: water close &burning air nozzle. Fully burnt, not only eliminated pollutant but also minimized the quantity of fuels. For smoke dust discharge, we apply series machines of patent in our company Desulphurization and dust remover which could control the smoke dust discharge amount meet relative standards of GB-2001.

b. Waste liquid: Produced waste acidic water in the process of oil disposing (50kg process from 1 ton of oil easy to process for small quantity). counteract the liquid by alkalescent liquid solution. After three stage of filtration, the litmusless waste water was introduced to evaporator (use the heat of the flue of main processor as its heating resource)

c. Waste solid. The solid residua will be left after the catalyst splitting from scrap plastic, approximately composes the waste plastic weight about 5% to 10%. Its main component is the black carbon. It can be the raw material of the production industry of black carbon. Also could be mixed with the pulverized coal ash which produces for the raw material thermal power plant, also could be the raw material of manufacture pulverized coal ash brick (one kind of environmental protection building material).

 

 

 

JZC-6604 waste tire to crude oil machine